Are you going to buy an efficient gas boiler that can provide heat in the most severe frosts? When choosing equipment for the home, many factors have to be taken into account. Which is the best option? What are the most important criteria? The owners of private houses and apartments have to think about solving this problem.
Agree, it’s a shame to pay twice and ultimately get an insufficiently functional boiler that is not able to heat a country house with the onset of cold weather. Therefore, before choosing a gas boiler in the store, you have to weigh the pros and cons. Otherwise, you can take a far from suitable model.
We will help you determine the main criteria that radically affect your choice. Useful recommendations and important nuances are outlined in our article. To help the homeowner, photos and a selection of videos with the advice of experienced experts in the field of heat supply are given.
The main nuances of choosing a gas boiler
The absence or constant interruptions of centralized heating and hot water supply force the owners of cottages and city apartments to create their own autonomous systems.
Their main element is a boiler, which, by burning fuel, heats the coolant for the heating system and domestic water.
The choice in favor of gas equipment is due to the economical use of gas as fuel. All other options for combustible fuel are more expensive or produce less heat at times.
Plus, modern heaters of this kind do not require constant supervision. I connected the installation to the main pipe or cylinder, and it works without interruption while there is something to burn.
The use of natural gas is the optimal solution for heating a private house in terms of fuel costs and operating maintenance costs
However, in order for the gas boiler to function properly and in the optimal mode, it is necessary to correctly select it upon purchase and regularly maintain it after connection.
There are many different functional and special modules within the models of this equipment. The purchase of a gas-fired heating unit should be approached carefully.
There are many criteria for choosing a gas boiler, but the main ones are:
- Power delivered by the device.
- Layout solution (number of circuits, housing type and heat exchanger material).
- Place to install.
- Availability of automation for safe operation.
All these issues are closely related. The lack of space for a large unit or the desire to mount a device with an aesthetic appearance in the kitchen forces us to choose a wall model of lower power than the floor version. And the need to heat hot water for the washbasin and shower makes you look for a boiler with two circuits.
When choosing a heater, you should remember about the need to repair it, if there is no workshop nearby for a selected model to service, then you should look for another option
Subtleties of choosing a boiler for heating and hot water
Modern heating equipment has a stylish appearance, is filled with all kinds of sensors and can work in several modes.
However, a promoted or widely advertised gas boiler does not mean - the best and best. When choosing, you should focus not so much on its design as on functionality.
Each gas boiler has a burner and a combustion chamber with a heat exchanger inside the housing, but there are also models with a circulation pump and other modules
First, the gas in the burner is ignited using an electronic system or a piezoelectric element. Then, as a result of its combustion, water is heated in the furnace by means of a heat exchanger, which is sent to the heating system circuit.
This is how classic single-loop models work. To prepare hot sanitary water, you must choose a dual-circuit installation or connect a boiler.
Image Gallery
Photo from
The simplest version of a gas boiler is a single-circuit floor equipment exclusively engaged in the preparation of a coolant for a heating network
If you want to build a dual-circuit system on the basis of the boiler, which produces water heating for domestic needs and preparation of a coolant, the single-circuit boiler is supplemented by a boiler
Wall-mounted versions of gas boilers are equipped with their own circulation pump, expansion tank and safety group. In fact, this is a full boiler room, but in miniature
As a rule, wall-mounted varieties of gas boilers are available in double-circuit design. Those. they work both to supply water to a hot water supply system, and to prepare a heat carrier for heating
A special type of gas boiler is condensing units. They accumulate the steam released during the operation of the boiler for transferring it to the heating circuit
Condensation boilers are produced both in single-circuit and double-circuit versions. Among them are both floor and wall
The principle of dividing by the number of circuits and installation scheme is common for all systems, but condensation ones can have a separate or integrated boiler
Condensing floor single-circuit boilers are complemented by a vertically or horizontally oriented boiler. If necessary, save space is better to choose horizontal
Floor single-circuit gas boiler
Boiler in addition to the floor gas unit
Wall type - double-circuit gas boiler
Wall View and Maintenance Outlines
Wall mounted condensing equipment model
Condensing boiler with integrated boiler
Condensing boiler with vertical boiler
Condensing type boiler with horizontal boiler
Criterion # 1 - material and design of the heat exchanger
The selection of an internal heat exchanger must be approached with particular attention. Water moves inside it, and quite powerful and high-temperature flow of thermal energy acts outside.
On the one hand, the material of its manufacture must be very durable, and on the other, heat-conducting. The more he transfers the heat generated by the combustion of gas to the coolant, the higher the efficiency of the installation.
Manufacturers equip gas boilers with heat exchangers from:
- cast iron;
- of stainless steel;
- copper.
Due to the lack of susceptibility to corrosion from contact with water, the cast iron version is the most durable. But he has quite a lot of weight. And with improper use, it can burst at the border between areas with very different temperatures. To prevent this, you will have to rinse it more often.
Steel heat exchanger is the most common. It is cheaper than cast iron and copper counterparts. Plus, this metal has good ductility, which reduces the likelihood of cracks. However, steel in the heating circuit corrodes quickly.
Copper is more resistant to corrosive processes and has better heat transfer characteristics. The heat exchanger from it is light in weight and compact in size. But this option costs a lot of money.
In channel No. 1 of the bithermal heat exchanger, water is heated for heating, and in channel No. 2 for hot water supply
According to the internal design, the heat exchange coil can be ordinary and bithermal. The first involves connecting only one water circuit, and the second at the same time two. Double-circuit boilers are equipped with a pair of conventional heat exchangers or one bithermal. The second option is cheaper.
Criterion # 2 - type of unit location
Gas boilers are installed on the floor or suspended on the wall. Models of the first type are called floor models and are characterized by large dimensions. Most often they have cast-iron or steel heat exchangers. These options have better performance in terms of the price of equipment / power than wall-mounted counterparts.
The main disadvantage of floor boilers is a lot of weight. But if you need a powerful unit, then you can not do without equipment installed on the floor. Mounted floor-mounted modifications are much inferior in power.
The choice here depends on your needs. For a private house with a large quadrature, a powerful model is required, and for a city apartment a more compact and less productive device will be enough.
Wall-mounted gas boiler is lightweight and low power, which for a small cottage in the vast majority of cases is more than enough
Unlike floor models, many of which can function without being connected to electricity, almost all mounted boilers are volatile.
The latter are effective, comfortable in operation and are pleased with advanced features in terms of customization. But when there is a power outage, there is no sense in them, in case of an accident not on the mains, heat will also disappear with the light.
For a country house, it is best to take a non-volatile floor-mounted boiler with mechanical control. It is easy to install and connect, it does not have programmable thermostats and displays, but it will generate heat even if the cottage is completely disconnected from the power supply. And the service life of equipment installed on the floor is higher than that of a wall competitor.
Criterion # 3 - the number of circuits
For the organization in the home of pure heating, the best option for a gas boiler is a single-circuit model. The same applies to situations where only a heater is needed to supply hot water to the faucet above the sink.
If it is planned to connect the pipes of the heating system and / or underfloor heating, as well as the hot water supply to the gas heating unit, then it must have two or more circuits.
It is also possible to connect an indirect heating boiler. In this case, a pipe is diverted from a single-circuit boiler to a tank with heated water. Technically similar schemes are allowed, but the only heat exchanger will work with increased load.
Water for domestic hot water and heating can be heated in two separate single-circuit boilers or in one with two circulation circuits (+)
Most double-circuit units are used to heat hot water for domestic use through a flow-through method, which is not very economical. It is better to install a remote boiler tank or choose a gas boiler with a built-in large volume water heater.
Both options will allow you to heat up to one cubic meter of water and maintain its high temperature for a long time. Single-circuit heaters are ideal for apartments, villas with non-permanent residence and cottages where a family of two to three people lives.
For a private house with several floors, with a heated pool or underfloor heating system, it is best to choose a dual-circuit gas boiler.
Criterion # 4 - combustion chamber, type of ignition and burner
To maintain the combustion of gas in the boiler, oxygen is needed. He can get into the furnace from the room or from the street. In the first case, the heater is equipped with an atmospheric burner of natural air flow, and in the second - closed with forced injection thereof.
Accordingly, two types of combustion chambers are distinguished:
- Open - oxygen to maintain the flame is taken directly from the room with heating equipment.
- Closed - air for burning gas is drawn into the furnace from the street by means of a coaxial chimney or an additional ventilation pipe.
In order to correctly determine which gas boiler is better - with a closed chamber and a turbo burner or with an open furnace and atmospheric burner, you need to clearly understand that the second option will require a chimney device five to six meters high to provide natural draft.
However, it is not always possible to bring such a high pipe to the roof.
In an open chamber, air inflow and removal of combustible gases occurs due to natural draft, and in a closed chamber these processes occur due to the built-in fan
To heat an apartment in an urban high-rise building, it is better to buy a gas boiler with an air blower and coaxial chimney flue. It has higher efficiency and is easier to mount. But it is volatile, a fan without voltage in the mains will not work.
Therefore, in order not to be left without heat at some point, it is worth taking care of an uninterruptible power supply or a backup electric generator.
An open-chamber heater is recommended to be installed outside the living area. An extension or a boiler room in the basement is best suited for this purpose. In this case, additional attention must be paid to the quality of ventilation in this room.
In some cases, you will even have to do forced ventilation, otherwise oxygen may not be enough to efficiently burn natural gas.
Image Gallery
Photo from
Atmospheric burner for gas boiler
The chimney is installed above the gas boiler
Gas type burner for gas unit
Blower in operation
On the one hand, the closed version has a higher efficiency and does not burn oxygen in the room, but on the other hand, such boilers are more expensive and depend on electricity. Without the latter, the gas heater with electric ignition will stop working.
If there are problems with the uninterrupted supply of electricity, it is better to prefer equipment with piezo ignition, for which electricity for operation is not required by definition.
Criterion # 5 - automation, adjustment and diagnostics
To simplify your life, when choosing a gas boiler, special attention should be paid to its “electronic filling”. Manufacturers offer a lot of additional options that greatly facilitate the operation of heating equipment on gas.
A remote control with sensors helps to monitor the temperature in the rooms and regulate the operation of the gas boiler, choosing the most optimal mode
Power adjustment can be:
- single stage;
- two-stage;
- Smooth with flame modulation.
The simplest and cheapest option is a single-stage with one ON / OFF button. The power of the boiler in this case is practically not regulated at all. The burner in it either works or is turned off.
Models with two-stage adjustment suggest a pair of operating modes with different power.
From this point of view, the best gas boilers are considered units with a modulator, which allows you to smoothly control the intensity of fuel combustion. Automation, depending on the flow of water and the temperatures set by the owner, independently turns on the required number of burners and adjusts the height of their flame.
To ensure safety, the heaters are equipped with:
- pressure monitoring sensors in the gas line, expansion tank and circuits with pumped water;
- flame attenuation sensors;
- self-locking system for various emergency situations (fires, smoke, power outages);
- pressure relief valves;
- water purification filters;
- overheating thermostats.
All this automation allows you to protect the heating equipment from damage in case of emergency, as well as maximize its efficiency.
The presence of smart automation helps not only maintain comfortable temperatures in rooms, but also reduce gas consumption
You can configure the boiler so that it, in the absence of people in the house, operates at a minimum cost, and half an hour before the owners arrive, it raises the room temperature to more comfortable indicators.
What capacity should the boiler be?
The technical documentation for the gas heater necessarily contains information about the rated power. Before buying equipment, it is advisable to calculate the heat demand of the room. Often the manufacturer there also indicates the quadrature of the room, which this equipment will be able to heat.
But all this is relatively arbitrary, without competent thermal engineering calculations of a particular house, it is not worth choosing a gas boiler.
The calculation of the required power is made taking into account the quadrature of the building, the configuration and type of heating system, climate zone and many other factors
Recommendations about 1 kW per 10 m2 cottages are very average indicators. They rarely reflect reality.
An experienced heat engineer in the calculations should take into account:
- area and cubic capacity of each room;
- climatic conditions of the region of residence;
- quality of insulation of external walls;
- the size and number of windows, as well as the type of glass in them;
- the presence of balconies and street doors;
- characteristics of the heating system, etc.
In addition, fuel quality and gas pressure in the line are taken into account. Separately, a calculation is made for the DHW system. And only then both figures are summed up and increase by 15–20% in reserve so that the boiler can cope with both constant and peak load without any problems.
Video # 1. How to correctly choose a gas boiler:
Video # 2. How to choose a gas type heater based on the declared power:
Video # 3. What is the best choice for a cottage floor boiler:
It is essentially impossible to give unequivocal advice on which gas boiler is better to buy. The heater for domestic hot water and the heating system for each particular home must be selected individually. And this should be done only on the basis of calculations by a competent heating engineer, taking into account all the nuances.
The criteria and subtleties in choosing a boiler mass. Before you go to the store, you should carefully study everything, but it is better to consult with a specialist in this field.
Do you want to share useful tips in the selection and purchase of a gas boiler? Have your own thoughts and experience in operating the unit? Found any flaws in the material presented for familiarization? Please write comments in the block below the text. Communication will help to quickly clarify difficult points.