Solar power is so far limited (at the household level) to the creation of relatively low power photovoltaic panels. But regardless of the design of the photovoltaic solar to current light converter, this device is equipped with a module called a solar charge controller.
Indeed, a solar battery photosynthesis installation scheme includes a storage battery - a storage device for energy received from a solar panel. It is this secondary energy source that is served primarily by the controller.
In the article we present, we will understand the device and the principles of operation of this device, and also consider how to connect it.
Solar controllers
The electronic module, called the controller for the solar battery, is designed to perform a number of control functions in the process of charging / discharging the solar battery.
When sunlight falls on the surface of a solar panel installed, for example, on the roof of a house, this light is converted into electric current by the photocells of the device.
Image Gallery
Photo from
The controller is a mandatory component of a solar station that generates an electric current from the energy of sunlight
Owners of private mini power plants and those wishing to acquire a solar power installation are now presented with two types of controllers: PWM (or PWM) and MPPT
PWM controllers provide multi-stage battery charge. With their help, filling, alignment, absorption and support of charge are carried out.
Inexpensive models of controllers for domestic solar installations are equipped with LED indicators that allow you to monitor the performance and technical condition of the battery
MPPT (maximum power point tracking) - controllers of a higher level and price. They provide for tracking the maximum power point
For small solar power plants, which include one or two panels, the capabilities of PWM controllers (PWM) are sufficient
Both types of controllers, as well as batteries connected to the circuit, must be installed indoors, since their design has temperature-sensitive sensors
There is no need to purchase a controller if you are purchasing an integrated solar station. In its insulated casing, there is a whole set of devices required for processing and storing electricity
Controllers for solar panels
Wide Pulse Modulation Controller
Multilevel Battery Charger
Budget model with LED indicators
The controller for the MRPT solar station
Small heliostation for giving
Connecting solar panels to the equipment
A complex of solar panels and equipment
The energy received, in fact, could be supplied directly to the storage battery. However, the process of charging / discharging a battery has its own subtleties (certain levels of currents and voltages). If you neglect these subtleties, the battery for a short period of operation will simply fail.
In order not to have such sad consequences, a module is called a charge controller for the solar battery.
In addition to monitoring the battery level, the module also monitors energy consumption. Depending on the degree of discharge, the circuit of the battery charge controller from the solar battery regulates and sets the current level necessary for the initial and subsequent charge.
Depending on the capacity of the battery charge controller of the solar power plant, the designs of these devices can have a very different configuration
In general, in simple terms, the module provides a carefree "life" for the battery, which periodically accumulates and gives energy to consumer devices.
Practical Types
At the industrial level, two types of electronic devices have been launched and are being manufactured, the execution of which is suitable for installation in the solar energy system circuit:
- PWM series devices.
- MPPT series devices.
The first type of controller for a solar battery can be called an "old man." Such schemes were developed and put into operation at the dawn of the development of solar and wind energy.
The principle of operation of the PWM controller circuit is based on pulse width modulation algorithms. The functionality of such devices is somewhat inferior to the more advanced MPPT series devices, but in general they also work quite efficiently.
One of the most popular models in the solar charge system for the solar station’s battery charge controller, despite the fact that the device circuit is made using PWM technology, which is considered obsolete
Designs that use the Maximum Power Point Tracking technology (tracking the maximum power limit), are distinguished by a modern approach to circuitry solutions, provide greater functionality.
But if you compare both types of controller and, moreover, with a bias towards the domestic sphere, MPPT devices do not look in the rainbow light in which they are traditionally advertised.
MPPT type controller:
- has a higher cost;
- has a sophisticated tuning algorithm;
- gives power gain only on panels of a large area.
This type of equipment is more suitable for global solar energy systems.
Controller designed for operation as part of the construction of a solar power plant. Is a representative of the MPPT class of devices - more advanced and efficient
It is more profitable to buy and operate the PWM controller (PWM) with the same effect for the needs of an ordinary user from a household environment, which usually has small-area panels.
Block diagrams of controllers
Schematic diagrams of the PWM and MPPT controllers for consideration by their narrow-minded look - this is too complicated a moment, coupled with a subtle understanding of electronics. Therefore, it is logical to consider only structural schemes. This approach is understandable to a wide range of individuals.
Option # 1 - PWM devices
The voltage from the solar panel through two conductors (plus and minus) comes to the stabilizing element and the dividing resistive chain. Due to this piece of the circuit, potential equalization of the input voltage is obtained and, to some extent, they organize the protection of the controller input from exceeding the input voltage boundary.
It should be emphasized here: each individual model of the device has a specific boundary for the input voltage (indicated in the documentation).
This is what the structural diagram of devices based on PWM technologies looks like. For operation as part of small domestic stations, such a schematic approach provides ample efficiency
Further, the voltage and current are limited to the required value by power transistors. These circuit components, in turn, are controlled by the controller chip through the driver chip. As a result, the output voltage of the pair of power transistors sets the normal value of voltage and current for the battery.
Also in the circuit there is a temperature sensor and a driver that controls the power transistor, which regulates the load power (protection against deep discharge of the battery). The temperature sensor monitors the heating status of important elements of the PWM controller.
Usually the temperature level inside the case or on the radiators of power transistors. If the temperature goes beyond the limits set in the settings, the device disconnects all active power lines.
Option # 2 - MPPT Instruments
The complexity of the scheme in this case is due to its addition to a number of elements that build the necessary control algorithm more carefully, based on working conditions.
Voltage and current levels are monitored and compared by comparator circuits, and the maximum output power is determined from the comparison results.
Structural circuit diagram for charge controllers based on MPPT technologies. A more sophisticated algorithm for monitoring and controlling peripheral devices is already noted here.
The main difference between this type of controller and PWM devices is that they are able to adjust the energy solar module to maximum power, regardless of weather conditions.
The circuit of such devices implements several control methods:
- disturbances and observations;
- increasing conductivity;
- current sweep;
- constant voltage.
And in the final segment of the general action, an algorithm for comparing all these methods is also used.
Ways to connect controllers
Considering the topic of connections, it should immediately be noted: for the installation of each individual device, a characteristic feature is the work with a specific series of solar panels.
So, for example, if a controller is used that is designed for a maximum input voltage of 100 volts, a series of solar panels should output no more than this value at the output.
Any solar power plant operates according to the rule of balance of the output and input voltages of the first stage. The upper limit of the voltage of the controller must correspond to the upper limit of the voltage of the panel
Before connecting the device, it is necessary to determine the place of its physical installation. According to the rules, dry, well-ventilated rooms should be chosen as the installation site. The presence of flammable materials near the device is excluded.
The presence of sources of vibration, heat and humidity in the immediate vicinity of the device is unacceptable. The installation site must be protected from precipitation and direct sunlight.
PWM Model Connection Technique
Almost all manufacturers of PWM-controllers require to follow the exact sequence of connecting devices.
The technique of connecting PWM controllers to peripheral devices is not particularly complex. Each board is equipped with labeled terminals. It just requires you to follow the sequence of actions
Peripheral devices must be connected in full accordance with the designations of the contact terminals:
- Connect the battery wires at the terminals of the battery device in accordance with the indicated polarity.
- Switch on the protective fuse directly at the contact point of the positive wire.
- On the controller contacts intended for the solar panel, fix the conductors coming from the solar panel panels. Observe polarity.
- Connect a test lamp of the corresponding voltage (usually 12 / 24V) to the load terminals of the device.
The specified sequence must not be violated. For example, it is strictly forbidden to connect solar panels in the first place with an unconnected battery. By such actions, the user risks “burning” the device. This material describes in more detail the assembly diagram of solar panels with a battery.
Also for PWM series controllers, it is not permissible to connect a voltage inverter to the controller's load terminals. The inverter should be connected directly to the battery terminals.
MPPT Instrument Connection Procedure
General requirements for physical installation for this type of apparatus do not differ from previous systems. But the technological installation is often somewhat different, since MPPT controllers are often considered more powerful devices.
For controllers designed for high power levels, it is recommended to use large cross-section cables equipped with metal terminations on power circuit connections
For example, for powerful systems, these requirements are complemented by the fact that manufacturers recommend taking a cable for power connection lines, designed for a current density of at least 4 A / mm2. That is, for example, for a controller for a current of 60 A, you need a cable to connect to the battery with a cross section of at least 20 mm2.
Connecting cables must be equipped with copper lugs, tightly crimped with a special tool. The negative terminals of the solar panel and battery must be equipped with adapters with fuses and switches.
This approach eliminates energy losses and ensures the safe operation of the installation.
Block diagram of the connection of a powerful MPPT controller: 1 - solar panel; 2 - MPPT controller; 3 - terminal block; 4,5 - fuses; 6 - controller power switch; 7.8 - ground tire
Before connecting the solar panels to the device, make sure that the voltage at the terminals corresponds to or less than the voltage that is permissible to apply to the controller input.
Connecting peripherals to the MTTP device:
- Switch panel and battery switches to the “off” position.
- Remove the protective fuses on the panel and battery.
- Connect the cable to the battery terminals with the controller terminals for the battery.
- Connect the cable to the terminals of the solar panel with the controller terminals marked with the corresponding sign.
- Connect the ground terminal to the ground bus with a cable.
- Install the temperature sensor on the controller according to the instructions.
After these steps, it is necessary to replace the previously removed battery fuse and put the switch in the “on” position. A battery detection signal will appear on the controller screen.
Then, after a short pause (1-2 min), put the previously removed fuse of the solar panel into place and put the panel switch in the “on” position.
The instrument screen will show the voltage value of the solar panel. This moment indicates the successful launch of a solar power plant in operation.
The industry produces multifaceted devices in terms of circuit solutions. Therefore, it is impossible to give unambiguous recommendations regarding the connection of all installations without exception.
However, the main principle for all types of devices remains the same: without connecting the battery to the controller buses, connection with photovoltaic panels is unacceptable. Similar requirements are presented for inclusion in the voltage inverter circuit. It should be considered as a separate module connected to the battery by direct contact.
If you have the necessary experience or knowledge, please share it with our readers. Leave your comments in the box below. Here you can ask a question about the topic of the article.