How much irritation, headache, inconvenience is caused by the water that appeared on the floor near the toilet! We reflect: what can happen in the simplest form of plumbing? We think: is this a serious breakdown or a minor violation? And when we find that the gasket between the tank and the toilet is damaged, we call the plumbers. It is so?
With our help, you can easily cope with the problem with your own hands. We will introduce the specifics of using gaskets of different configurations. Independent home masters who are not afraid of any work, we will find a detailed description of the procedure for laying and fixing seals located between the toilet and the tank.
The valuable suggestions we offer will help novice plumbers. The article outlines the principle of replacing gaskets, technical nuances are affected, recommendations are given that ensure a successful result. A good help facilitating the perception of information are photos and videos.
Briefly about household toilets
Despite the simplicity of the design of classic household toilets, the requirements of GOST (in particular, 12499, 21485, 30493) are imposed on these plumbing fixtures.
These requirements determine both individual structural parts and the accessories used, including toilet gaskets, which are superimposed when the bowl and water tank are articulated.
Almost any toilet design involves the use of a gasket between the tank and the bowl body. An exception is structures supporting an inseparable storage and drain system. However, such toilets are rare
These nuances once again confirm: the quality of the home plumbing fixture and the operational safety of the device directly depend on the use of only “native” parts and accessories. And the gaskets between the tank and the toilet bowl do not stand aside, given their rather wide variety of designs.
Types of gaskets used
The purpose of the seal for its installation between the storage tank and the toilet bowl should be clear. The accessory, usually rubber or silicone, provides tightness between the two main parts of the toilet plumbing.
The shape of this mounting accessory can be:
- round;
- oval;
- trapezoidal;
- another (usually on imported devices).
It should be clarified: there are gaskets for the tank of a home toilet bowl, the design of which is designed exclusively for sealing drainage mechanics.
There are also seals, the role of which is to organize a soft insert between two ceramic parts.
A gasket assortment that clearly demonstrates what type of sealing products are used for sealing, depending on the design of the toilet device. The kit shows the three most common types.
The presence of a soft insert between the mounting components additionally protects fragile faience parts from accidental damage during installation and operation. The type and shape of the seal is determined by the standard size of the toilet, between which this part is placed between the tank and the bowl.
Option # 1 - Round
In most cases, round-shaped articles, thickened, made on the basis of dense rubber of white or black color, are used as a sealing seal.
However, there are also (in sets of inexpensive models) toilet gaskets for the storage tank made of foam rubber. Such a product economically justified by the manufacturer clearly does not satisfy user requests.
This is the so-called parody of a really high-quality gasket. A sealing element made of large-pore rubber (foam rubber) actually resembles a sponge ring. There is no need to talk about the quality tightness created using such a sponge
In practice, foam rubber seals hold water for no more than 2-3 days of operation (should be noted when choosing). Ninety out of a hundred installations fail and, as a rule, force the master to change the foam rubber to a classic rubber (silicone) sealant.
Option # 2 - Oval
This type of gasket for home toilets under the tank has traditionally been installed on older models of plumbing fixtures. Modern designs are rarely equipped with such seals. In fact, this type of product has long been discontinued and is not used.
Gasket copy of past times. Such sealing elements were used on older toilet designs, which were equipped with a highly suspended cistern with a handle on a metal chain. These devices were remembered by the characteristic sound of water draining.
Meanwhile, oval products made of thick, high-quality compressed rubber showed reliable performance. True, to tightly press such seals to the seat of the hitch of the tank and toilet bowl, more effort was required than the design of modern gaskets requires.
Option # 3 - trapezoidal
A trapezoid is also a rather rarely used type of gasket between the toilet bowl and the filling tank.
The trapezoidal shape of the toilet seal is characterized by a kind of negative point - for reliable sealing requires broaching with at least three fixing screws.
This is the so-called trapezoid - a trapezoid-shaped sealing rubber that is used on some models of toilet appliances. A somewhat complicated form of gasket requires a high-quality coupler of the tank and the bowl with fixing screws
Therefore, plumbing fixtures for this type of seals usually have 3-4 fastening screws for the screed “bulk tank - toilet bowl”. As a rule, two screws are located symmetrically on two lateral sides, and another (two) in the center at the long (short) base of the trapezoid.
Option # 4 - Universal
The most commonly used configuration of gaskets (on the toilets of the middle price segment) is represented by a product, one might say, of a universal shape.
The outer side of such a seal is flat and round, and the inside in the form of an equilateral hexagon. The working surface of the sealing ring (the area of contact with the faience parts) has a wavy shape.
Such a solution contributes to better sealing due to the achievement of high density even with a slight tightening of the fixing bolts.
One of the most common forms of seal, which ensures the tightness of the connection between the storage tank and the toilet bowl. The thoughtful design of the cushioning element was noted in practice by the high quality of the seal. In addition, installing such a gasket is easy and simple.
Officially, the product is referred to (marked) as M60 or KK100 - depending on the diameter of the passage opening. The hexagonal inner part of such seals is designed to fit over the fastening nut of the drain mechanism, which is used in the drain tank of modern toilet designs.
Nuances of mounting seals
There are usually no special nuances for installing gaskets between the drain tank and the toilet bowl. An exception is the rare, far from the standard configuration models of plumbing fixtures. As a rule, the sealant is inserted (laid) inside the landing recess intended for it in the interface area.
After that, the drain tank is carefully placed at the installation site so that the holes for the mounting fittings on the tank and bowl stand are aligned. It is important not to shift the gasket from the landing area at the time of installation of the tank.
The seat for the sealing element usually looks like a recess in the body of the toilet shelf, has a diameter equal to the outer diameter of the cushion disk. But there are also bowls with smooth seating shelves. For such designed seals type M60
It is somewhat easier to mount the filling tank on the stand of the toilet bowl when gaskets of the type M60 and KK100 are used. This rubber seal is tightened on the fastening nut of the drain mechanism. Therefore, the risk of displacement of the gasket M60 (KK100) at the installation is practically reduced to zero.
A step-by-step instruction on disassembling the drain tank for repair work is given here. In the article we recommend, you will find many valuable recommendations.
Intermediate gasket tank-bowl
Some models of domestic toilets are made to articulate the tank with the toilet bowl through an additional intermediate gasket. If one is included in the plumbing kit, it is easiest to install it by pre-fitting the threaded rods of the fixing screws.
Intermediate emollients. Their main purpose is to protect fragile ceramics. These gasket elements are installed together with gaskets under the tank. Generally made from material similar to Isolon.
Intermediate seals traditionally have "ears" with holes through which the rods of the fixing screws pass. If the intermediate seal is installed in place, aligning with the mounting holes, and then trying to install the tank, the gasket can easily be moved from the landing site. Therefore, it is the nozzle on the screws that simplifies the installation procedure.
Force moment screeds
It would seem that there is nothing simpler than tightening the connection parts with screws after all the manipulations with the gaskets. Meanwhile, the fastening procedure also has its own characteristics. Screw the nuts onto the threads of the bolt studs evenly, about 2-3 threads, applying the action to the bolt joints in turn.
The dismantling and reinstallation procedure is also carried out if the tank does not hold water. Those. if you need to replace the fittings responsible for the collection and discharge of water from this plumbing tank.
Tightening the screws that secure the tank-bowl assembly should pay attention to the correct execution of actions. It is necessary to ensure uniform retraction of parts at moderate force pressure
The torque should be calculated correctly. There is no need to tighten the bolt connections when the gasket is already firmly tightened. Especially hauling is not recommended for connections where polypropylene screws are used. And to ensure guaranteed reliability, it is reasonable to replace plastic fastening accessories with metal products.
Testing an installed gasket
The procedure for testing gaskets (checking the reliability of tightness) is an essential part of installation. The test does not require any special locksmith manipulations.
After completing installation work, it is enough to fill the toilet tank by two-thirds with water by briefly opening the stopcock. In this condition, the plumbing fixture should be carefully inspected in the area where the sealing rubber is located. The first test is considered passed if no obvious water leaks are detected.
Leak tests are carried out in a standard way - by adding water to the tank and then checking for water leakage. It is advisable to conduct tests in two stages for greater confidence in the quality of the seal
The second test will take some time - at least half an hour. It is necessary to fill the tank to the full level (the boundary level of the drain mechanism) and withstand (half an hour or an hour) in this state.
Then take a piece of toilet paper and carefully wipe it with the toilet areas adjacent to the installation area of the pad. Similar actions must be performed both on the upper side and below. Is the paper dry? In this case, you can start the plumbing in operation.
If after the second check the toilet paper becomes wet (even partially), these symptoms indicate poor sealing. You should not rely on "maybe" here. The right decision is to redo the installation of the bulk tank with the correction of the installation of the sealing gasket. In this case, it is desirable to determine the causes of the leak.
It often happens that the water on the floor near the toilet is not at all the cause of its leakage. It “sweats” the tank. We recommend that you familiarize yourself with the causes of condensation on its surface and with methods for removing unwanted moisture.
Principle of complete tightness
Why is it necessary to achieve complete tightness of the system when mounting the tank to the toilet bowl? The requirements are explained simply. Even a small leak leads to the formation of foci of dampness. And dampness is an optimal environment for the reproduction of a microbial environment.
The second stage of the leak test - here you need a time delay and careful monitoring for leaks using a simple sensor - toilet paper
A slight (inconspicuous) leakage of water contributes to the formation of water stone. This substance has a negative effect on rubber - it deforms individual sections of the gasket. As a result, the operation of the device turns into emergency leaks. Such accidents can occur at any time, including during the absence of homeowners.
Finally, the presence of a slight leak and an increase in the humidity level inside the toilet room affects the longevity of the surrounding materials. In conditions of dampness, the service life of even the highest quality products is reduced by half.
You will learn about how to deal with a leak in the toilet itself from the next article, the contents of which we recommend that you familiarize yourself with.
There may be several reasons for leaking the tank. The video shows how to fix a leak by replacing old parts with new ones.
The result of the review: such a seemingly insignificant detail of the bowl-to-tank toilet assembly as the sealing gasket actually turns out to be an important element of installation.
Without the installation of a rubber (silicone) sealing part, the operation of the toilet bowl is impossible in principle. Replacing branded gaskets with self-made products also does not solve the problem. True quality homemade depends on the material and diligence of the master.
In general, there is an object for attention on the installation of toilet plumbing.
Want to talk about how to change the gasket with your own hands? Would you like to share the “tricks” of the process, known only to you? Please write comments in the block below, ask questions, leave a photo on the topic of the article.