Unfortunately, the appearance of even the most modern heating devices does not always meet aesthetic requirements, and sometimes it can not fit perfectly into the interior of the room. The desire of the owners to eliminate this drawback is quite natural.
Before you close the heating battery, you should understand all the intricacies of the issue. Otherwise, housing heating costs can increase significantly. In our material we will tell you how to do this without any special financial costs and heat loss.
Disguise of radiators and laws of heat engineering
The main task of any heating radiator is to heat the room. The goal is achieved by a combination or separate use of two methods - infrared radiation and convection. Thanks to them, comfortable conditions are formed. Infrared radiation provides heat transfer to objects in the room, convective - heats the air.
We can feel thermal energy if we place our hand in the immediate vicinity of the radiator. Convection provides air circulation and even temperature distribution throughout the room. This is also known from the course of school physics - warm air, rising up, displaces colder.
The radiator screen performs several important functions: it connects the device to the design, protects it from damage and settling dust, during the combustion of which toxins emit
You need to understand that almost any method of hiding pipes and radiators will lead to an inevitable loss of heating power. The simplest example is the use of a glass screen with artistic painting.
It would seem that the task of decorating the radiator was completed successfully, but the room became immediately noticeably colder. It all happened because glass almost completely eliminates infrared radiation.
An original way to mask the heating battery will help expand the windowsill and use the design as a piece of furniture
The deeper and more securely the radiator is hidden, the greater the loss.
This statement fully applies to dull screens, which prevent both long-wave infrared radiation and short-wave convection.
Maximum perforation of the grill, the presence of gaps in the upper and lower parts of the lining - the key to normal convection
The same can be said about the deaf ducts above the upper part of the radiator - they are an insurmountable barrier to the spread of warm air up (the convection method does not work). The conclusion suggests itself - the larger the area of the holes in the patch, the smaller the heat loss.
Original ideas on the decor and camouflage of heating appliances will be presented by a photo selection:
Image Gallery
Photo from
The construction of the screen on the principle of blinds
Spectacular panel decor
Cast iron battery masking option
Design under the "soft" window sill
Masking a radiator in a wall niche
Battery screen as an art deco object
Making a radiator near a blank wall
Factory-made plastic screen
Requirements for the decor of heating radiators
The availability of pipes and batteries is another important point in choosing a decor after the requirements of heating technology. It is well known that a heating battery, and a nominal connection with a pipe, is the weakest point. In addition, the radiator itself, due to improper installation and operation, or for a number of other reasons, can leak.
In emergency cases, it may be necessary to remove the radiator for repair or replacement.From the point of view of plumbing, the overlay or screen should not have a fixed mount, ideally the use of attached screens.
Even if you decide to neglect the plumber's advice, still listen to the gloss of reason, which suggests that the connection nodes are any weak point in the system. The presence of a revision (plastic door) can greatly simplify the task of servicing the radiator and heating system in the future.
The decorative grille should provide the easiest and fastest access to the battery or to the connection point for the possibility of repair operations
Ways to decorate heating batteries
There are a great many ways to close a heating radiator. To choose the best option, although not easy, is quite possible. Let's start with the simplest and most affordable ways.
Option # 1 - budget painting
From the point of view of the designer, the combination of colors is very important. Most often, the heating radiator is painted white, so on the walls of light colors it will be practically invisible.
If the walls have a solid dark color, then there will also be no problems. It will be enough to choose a heat-resistant paint of the desired color and paint the radiator. If it is not possible to perfectly get into the tone, then there will be nothing to worry about, the difference in several tones against the general background seems almost invisible.
If the wallpaper on the walls has a pattern, then the radiator must be made to match it. Most often, one or two walls have an ornament, and the rest are finished with wallpaper of different textures in one tone.
In this case, from the remnants of all the wallpaper used, it is necessary to cut strips and stick them on the radiator. The thickness of the strips and the alternation should be selected on the spot, empirically, trying to fit the resulting pattern most harmoniously into the interior of the room.
Heating batteries are painted with a heat-resistant composition that does not wear out and does not emit harmful substances when heated. The use of stencils, templates and ready-made stickers greatly simplifies the process of decorating a heating radiator
If we are talking about masking heating radiators in a nursery, then you can give free rein to imagination and paint them to match the surrounding interior. Ready-made stencils will come in handy in case of insufficient experience with the brush. Do not forget to use only heat-resistant paints.
Option # 2 - use of fabric
Another proven and very successful way to mask the heating radiator is the "curtain to the floor." Previously, this method was the simplest and most popular due to the fact that heavy blackout curtains were in fashion. Now it is customary to use dense fabric, which is fastened with Velcro to the wall or window sill.
It is best to fix the curtain from wall to wall, for a light curtain it will look great. This can be done by replacing the curtains with vertical blinds.
Screens from a metal frame and fabric in the tone of wall decoration - an inexpensive effective solution that practically does not affect the heating technology of the device
Option # 3 - Hard Screen Device
One of the easiest ways to close batteries is to use side shields. For their manufacture can be used in a variety of materials or whole combinations.
True, you need to consider that the screen by the wall itself can look ridiculous, so you need to think through its details to the smallest detail and fit it into the interior correctly. In the store, it will not be difficult to find ready-made screens and close heating radiators with their help.
If you plan to install the screen, then when calculating the required power of the device, a correction factor is applied, depending on the method of installation of the structure
The most widespread are the following types of screens.
Metal screens for batteries
As a rule, stainless steel is used for its manufacture or chromium plating is performed. Such products are characterized by good thermal conductivity and durability.
With a relatively low cost and good functionality, their appearance is poor. Without additional decoration, such screens are suitable for decorating a high-tech room.
Metal structures are characterized by high thermal conductivity and will not greatly affect the thermal performance of the device
Wooden grill for radiator
This option is considered the most win-win, as the tree easily fits into the interior of almost any room. It’s best not to purchase a ready-made standard screen, but to make it to order. The appearance of the wooden screen must match the style and color of the furniture or be part of it.
The appearance of the wooden screen resembles a wicker lattice and looks impressive and stylish. A wooden grill is best for masking the battery located under the window. Such a design with a sufficient number of holes does not prevent the penetration of warm air and provides good convection.
Wood is a material with high insulating properties. When choosing a wooden screen for the battery, it is better to prefer a design with a high degree of perforation
Decorative glass screen
Decorative glass will give the interior of any room a look of lightness and ease. Rooms with a glass screen made of decorative glass take on the appearance of well-groomed and finished. True, along with a spectacular appearance, such a screen also contains a significant drawback.
The decorative glass screen fits perfectly into the interior of any room, however, the absence of perforation even with gaps at the top and bottom will significantly reduce heat transfer
When using a glass screen, heat transfer is almost halved. Therefore, you have to choose between showiness and effectiveness. If you approach the issue correctly, it is best to use a screen made of decorative glass panels - this will achieve the corresponding hiding effect and ensure maximum thermal conductivity.
Drywall Screen
If earlier it was a question of screens, as finished products, then a gypsum board screen can be made independently. A drywall screen is considered the most budget option. Make it possible for everyone, and fastening with subsequent finishing should not cause special difficulties.
Do-it-yourself battery screen made of drywall, thick plywood or similar material
Since the version of the drywall screen device is considered the most universal, we will dwell on its device in more detail. To create and install a screen, you will need the following tools and materials:
- Screwdriver
- Hammer drill
- Stationery knife
- Scissors for metal
- Roulette
- Pencil
- Stapler
- Sandpaper Level
- Drywall Sheet
- Profile CD and UD
- Lattice
Let's open a little secret - drywall is not recommended to be used without preliminary processing. This is due to the fact that this material does not have sufficient thermal conductivity. In addition, under the influence of heat, it collapses and crumbles.
You can correct the situation by processing 2-3 times a sheet of drywall with PVA glue. Such processing will not only effectively prevent drying out, but also significantly increase thermal conductivity.
Image Gallery
Photo from
Step 1: Frame device from profile
Step 2: Attaching Drywall Sheets to the Frame
Step 3: Dismantling the radiator for a niche
Step 4: Reinforcing the corners and seams of the drywall
Step 5: Processing the Niche with Stucco
Step 6: fixing the radiator and wall decoration
Step 7: Decorating a Niche with a Battery Screen
Step 8: Screen Decoration Niche Option
Work on the installation of a drywall screen begins with the installation of the frame. For its manufacture, it is necessary to cut the UD guide profiles and fix them with self-tapping screws to the floor and window sill. In order for the screen surface to coincide with the wall surface, the frame must be recessed to the thickness of the drywall plus the thickness of the finish. Usually, this value is 13-14 mm.
Next, you need to fix the CD profiles, while taking into account that the distance between the vertical profiles should slightly exceed the size of the grating. Armed with a pencil and tape measure, you need to put on the sheet the dimensions of the blanks and cut them with the help of an office knife.
Correctly installed UD and CD profiles will help without any difficulties with the further installation of drywall under the grill for the radiator
Cut blanks should be screwed to the frame using self-tapping screws. Fastening should be done very carefully, since with excessive deepening of the self-tapping hats, a drywall sheet may break. It remains to fix the grille and finish the screen.
Drywall sheets or plywood can be fastened with wooden slats. The figure clearly shows how to fix them correctly.
Option # 4 - building battery boxes
Boxes that hide the batteries, it is best to arrange during the repair or installation of the heating system.
The following materials are suitable for the manufacture of the box:
- Drywall. One of the most common materials. It has a low cost, lightweight and easy to handle. There are many ways to finish using drywall. This material can be puttied and painted, pasted with wallpaper and film, decorated with stucco.
- MDF panels. Another budget option for decorative cladding. MDF is not afraid of sudden changes in temperature and is not exposed to drying. Usually, the design of MDF panels imitates wood of exotic or rare woods, which makes it easy to fit into the interior of the room.
- Plywood. This material is very light and easy to handle. With it, you can quickly make a durable and lightweight screen for the radiator. Plywood is easy to cut and also decorated. As finishing, varnishing, painting, gluing a film or wallpaper, decorative plaster can be selected.
- Laminated chipboard sheets. This material is more difficult to work with, although there are never any problems with fixing it.
- Wood. In favor of this material is evidenced by its environmental cleanliness and naturalness. With the help of wooden bars and rails, you can make a wonderful box without working skills and special tools, which will help to perfectly close not only the radiator, but also the heating pipes. At the same time, it is much easier to work with rails, especially this applies to work in hard-to-reach places.
A box can become not just a decoration and disguise of a heating battery, but also carry a functional or aesthetic load. If you consider the option with functionality, then you can, for example, using sheets of chipboard and guides to make a cabinet in the entire width of the room.
The optimal height of such a cabinet should correspond to the height of the window sill, if the radiator is located under the window.
The central part of the cabinet cabinet effectively masks the heating radiator, while the rest of the cabinet is used as a bookcase
The aesthetic load of the box is more difficult to implement, but is quite feasible. The radiator located near the wall can be decorated under the fireplace. In this case, it is not necessary to use brickwork and the installation of a forged grate. You can do much easier and make a box from a cut sheet of plywood or fiberboard.
Maintaining proportions and not deviating from the scheme, in just a few hours you can make a frame for a decorative fireplace from wooden battens and plywood and make it
After fixing the wooden rack frame and installing the cut sheets of plywood, it remains to glue the fireplace with a film. You can go further and stick the drawn flame or embers inside the fireplace, everything here depends on the flight of your imagination.
Image Gallery
Photo from
Front Battery Shelf Box
Ottoman radiator masking
Box with an attached desk
Box as an extended window sill
Arrangement of a corner window sill with radiators
Box-insert between bookcases
Desktop device with box
Replacing the traditional windowsill
Option # 5 - placing batteries in niches
One of the most laborious methods of masking radiators and heating pipes is implemented at the construction stage or during major repairs. This method assumes the placement of pipes and radiators not on the wall, but inside it.
Of course, this will inevitably lead to a decrease in the useful area of the room and an increase in heat loss, but there is no need to puzzle over how to decorate radiators and heating pipes.
You can go even further and completely abandon radiators and pipes, replacing them with warm floors. If the heating efficiency is insufficient, then it is possible to supplement the heating system with invisible convectors mounted in furniture, window sills, a basement, a floor, etc.
Invisible convectors can compete with standard heating systems with pipes and radiators
Option # 6 - arrangement of radiators in the bathroom and kitchen
In the bathroom, it is best to hide radiators in any pieces of furniture. Hanging lockers are best suited for this. If for any reason it is not possible to hide the radiator in a cabinet, it is better not to resort to the manufacture of hinged boxes. They will look awkward on the wall. In this case, it’s better to simply paint the radiator to match the walls.
As for the placement of the radiator on the floor, you can limit yourself to installing a screen. For the manufacture of the screen, MDF and plastic are suitable, it can also be glass and chromed metal - these materials go well with the sterile cleanliness and gloss of ceramic tiles.
In the kitchen, radiators are most often masked under the windowsill-countertop. This technique allows not only to hide the radiator, but also significantly increase the working surface. If we are talking about a small-sized apartment, then this technique can be considered a significant bonus. It is already difficult to argue here which aspect is more important - functional or aesthetic.
The functionality of the kitchen is enhanced by installing an additional work surface in the form of countertops and cupboards
There is another option for installing a folding table. In this case, the color of the countertop and the color of the walls should be the same. The disadvantage of this design is the inability to make the design of the countertop perforated. The presence of a gap between the countertop and the floor, as well as between the countertop and the windowsill, will help ensure normal convection.
Video review of masking structures made of decorative glass:
The painting of the heating radiator is shown in the video:
The video will introduce interesting options for decorating heating appliances, the manufacture of which can be handled personally:
When performing masking by any of the proposed methods, do not forget about the main functional task of the heating battery - heating and heat distribution. Incorrectly selected material, installation and decoration scheme can increase heat loss several times.
Do you have questions or have suggestions for masking radiators? Or maybe you yourself built a screen for a heating battery? Please leave your comments or additions to the material in the block below.