The concept of alternative energy for many owners of private houses and cottages is associated with expensive solar panels, windmills or heat pumps. No one even guesses that in just a few hours, for a mere penny, you can build a solar collector from plastic bottles to supply yourself with hot water throughout the warm season.
We will tell you how to make an effective system for the preparation of sanitary water from waste materials. In our article, you will find a detailed description of the designs and methods of manufacturing systems whose operation has been tested in practice. Based on our recommendations, you can easily assemble a device that is useful in the household.
The specifics of the use of solar collectors
The main difference between the solar collector and the various types of heat-generating solar systems is the cyclical nature of the work. In other words - in the absence of the sun there will be no thermal energy.
It is obvious that in the dark, the performance of an autonomous hot water supply with a solar collector is reduced to zero. Heat production by the solar collector is determined by the length of daylight, which depends on the latitude and time of year.
A home-made solar collector will solve not only the issue of hot water supply at home, not connected to central networks, but also the problems of heating
The climatic features of the terrain also have a significant impact on the level of productivity of the solar collector. If the area is characterized by frequent fogs or the sun often hides behind the clouds, then the performance of the solar collector is significantly reduced.
However, in this case, the solar collector for heating and / or heating water remains effective, due to the ability to capture even scattered rays.
Design features and principle of operation
The main element of the standard version of the solar collector is an adsorber in the form of a copper plate with a tube. The plate quickly heats up under the action of sunlight, transferring heat to the tube and the liquid in it. Due to free or forced circulation, the heat generated is then transported throughout the system.
Under the influence of sunlight, a copper plate is heated, from which heat is transferred to the coolant in the tube
To increase the efficiency of the adsorber should be endowed with the necessary physical properties. First of all, it is necessary to increase the adsorption capacity of the adsorber and to minimize the reflection of sunlight. The simplest solution is to apply black ink to the adsorber.
To increase the efficiency of the adsorber, it must be covered with transparent glass. Ordinary glass reflects part of the sun's rays.
It is best to use special glass with a low iron content or use anti-reflective coating. To avoid contamination of the glass, the case of the solar collector should be sealed.
Despite the many ways to improve the work and increase the productivity of the solar collector, nevertheless, due to imperfections in the design, this indicator is far from ideal. Given the principle of the solar collector and methods for increasing its efficiency, we will try to create a primitive and inexpensive model from improvised materials.
Assembly of the unit from improvised materials
In addition to low cost and ease of assembly, the option of plastic bottles differs from standard solar systems in that flat solar collectors do not work well in the morning and evening hours.
The convex shape of the bottles provides almost vertical penetration of rays even during sunset and dawn, thereby ensuring the efficiency of the device, both in the morning and in the evening.
Due to the convex shape of plastic bottles, the device, even when horizontal, is able to pick up the rays of the rising and setting sun
There are several distinctive ways to build a perfectly working system for producing hot water from plastic bottles:
- The solar collector plays the role of a storage tank in which water is heated and then drained;
- The solar collector is connected to the storage tank to ensure water heating and its natural circulation;
- Plastic bottles of the collector act as a reservoir for water;
- Plastic bottles play the role of sealed containers to retain heat.
Also, solar collectors can vary in their design features. First of all, this is due both to the method of fastening the bottles and the ways of their location.
The option with the accumulation of heated water
For the manufacture of a solar collector, a polypropylene pipe with a diameter of 50 mm will be required, to which plastic bottles will be connected, the number of which is determined by the diameter of the pipe. For the template, 15 plastic bottles were taken, so the working capacity of the solar collector was 30 liters.
The joints between the bottles and the propylene pipe are lubricated with silicone sealant to prevent water leakage.
To connect the bottles into a single system in a propylene pipe designed for hot water, it is necessary to drill holes. The ideal solution was to use a drill bit on wood with a diameter of 26 mm.
With such dimensions, the maximum density of the connection is ensured, and the bottle is screwed into the hole with its own thread. To ensure maximum sealing of the joint, the joints can be coated with silicone sealant, but it is better to use hot melt adhesive.
To achieve the effect of communicating vessels in the upper part of each bottle, it is necessary to make holes with a diameter of about 2 mm.
After connecting the bottles, a fitting is cut into one side of the pipe, which will later be connected to the water supply for water supply. On the other hand, a tap should be inserted through which heated water will merge into the storage tank.
However, under the weight of the filled water, such a device for the domestic use of solar energy may lose its integrity. Therefore, it will be appropriate device box. To make it, you need a board with a width of 150 mm.
To increase the efficiency of the solar collector, at the bottom of the box, you can put polystyrene or polystyrene foam 50 mm thick and cover with foil.
After installing the solar collector in the place of its further operation, the plastic bottles must be painted black for more efficient absorption of sunlight.
When stained black, the absorption capacity of the plastic increases and the efficiency of heating the water increases
It is better to use matte paint and apply by spraying from an aerosol can. It remains to cover the box with glass, thereby increasing its tightness and connecting it to the cold water supply system and the drain system of the warm water prepared for use in the storage tank.
From practical experience it is known that plastic does not tolerate the effects of high temperatures, which lead to its deformation. On bright sunny days, the temperature of the heated water can exceed 65 degrees, which will lead to plastic deformation.
In this regard, it is better to refuse additional sealing of the box with glass in general or use it exclusively in cloudy weather.
The method with the circulation of heated water
The system of the solar collector is similar to the first option, but has a number of structural differences.
To create a collector, you will need the following tools and materials:
- PVC pipe with a diameter of 20 mm with corners and tees;
- Roller pipe cutter;
- Chisel cutters;
- Primer (cleaning agent);
- Plastic bottles;
- Tetrapaki made from milk or juice;
- Stationery knife;
- Cardboard;
- Heat-resistant matte black paint;
- Storage tank.
For installation, we need a PVC pipe with a diameter of 20 mm. The horizontal part of the pipe should be cut into segments into which corners and tees will be attached by cold welding. The bottom of the solar collector will look exactly the same. In the end result, we get a closed system, but first things first.
Features of gluing PVC pipes
To obtain a high-quality cut, it is better to use a pipe cutter equipped with rollers. After cutting, it is necessary to chamfer the inside of the pipe using special chamfering tools.
After measuring the depth of the tees and angles, you need to set the mark on the end of the pipe to be connected and treat the pipe ends and fittings with a primer (cleaning agent).
Thanks to the smooth movement of the cutting part, the roller pipe cutter allows you to avoid deformation of the cross section and the formation of burrs along the edge during cutting
The next step will be the application and distribution of glue on the outside of the pipe and the inside of the fitting. Glue must be applied with a brush, while its size should be less than the diameter of the pipes. It remains to insert the pipe into the prepared tee or corner and turn it a quarter of a turn to evenly distribute the glue.
Please note that gluing one corner or tee should not take longer than 30 seconds. After fixing it is necessary to remove the remains of glue.
Solar collector manufacturing procedure
After preparing the upper pipe and attaching the vertical pipes to it, you can begin to prepare plastic bottles. In the presented model of the solar collector, there are 4 vertical pipes 105 cm long, 5 plastic bottles can be placed on this length of the pipe. That is, to collect the collector you will need 20 identical plastic bottles.
From each bottle you need to remove the bottom. To do this, you should make a simple template from a 30 cm long piece of cardboard rolled into a tube. Using a template and a stationery knife, remove the bottom on the bottles. After preparing the bottles, you can begin to manufacture an absorber that will absorb solar energy.
Using a simple cardboard template makes it possible to quickly cut and get bottles of the same size
In the role of an absorber, we use used tetrapacks from juice or milk. They must be cut, thoroughly washed and dried. To improve their absorption capacity should be applied matte black paint. The easiest way to do this is by spray paint.
Sequential stringing of plastic bottles makes it easy to place folded tetrapacks in them
After preparing the bottles and tetrapacks, you can start assembling the solar device. First, on a vertical tube you need to string a plastic bottle with its neck forward and insert a tetrapack into it. Similarly, all bottles are strung on vertical tubes, which then need to be connected to tees and corners of the lower pipe, similar to the upper.
To give rigidity to the manufactured solar collector, it is necessary to make a support for it.
A conventional wooden shield gives structural rigidity and makes it easy to move the solar collector to its place of use
It is possible, as in the first case, to place the collector in a wooden box, but it is no longer necessary to insulate it. Since each of the plastic bottles is a kind of small insulated tank, which, warming up from the inside, transfers heat to the water circulating through the pipes.
Features of placement and connection
For the maximum possible absorption of sunlight, the collector must be oriented in a southerly direction. A small angle of inclination of 10-15 degrees is enough for the collector to work effectively in almost any location of the sun.
The lower part of the pipe must be connected to the lower part of the storage tank, and the upper one approximately to its central part. Cold water from the polymer tank will flow through the lower pipe into the collector, where it will heat up and rise through the upper pipe into the tank.
Thus, the natural circulation of water through a makeshift system will be carried out. To ensure a high intensity of water circulation, the tank should be placed just above the solar collector at a distance of at least 0.3 m from it.
If the solar collector is correctly connected to the storage tank, natural water circulation is ensured.
It should be noted that when cold water enters the tank from the water supply system, it is actively mixed, which reduces the efficiency of the collector. This can be avoided by equipping the entry into the tank with a turbulent gearbox, which is a plugged tube with multiple holes.
Water flows smoothly through the gearbox, which allows cold water to remain in the lower layers, from where it is taken into the solar collector.
The use of a turbulent gearbox helps to avoid mixing cold and warm water in the storage tank.
It is obvious that the solar collector provides water heating only in the daytime in sunny weather. Therefore, it is important to preserve hot water for use during the day and evening. To do this, it is necessary to warm the storage capacity.
Video 1. So the first helio-systems from plastic bottles appeared:
Video 2. Almost free device for heating water in action:
A plastic solar collector for drinks is a cheap solution for producing hot water. However, in case of prolonged inclement weather, especially in spring and autumn, it is advisable to install a heater in the storage tank. In this case, the solar collector will become part of a complete system, which, under favorable conditions, will save money.
Tell us about your experience in building a homemade solar system from plastic bottles. It is possible that your arsenal contains information and design options that may be useful to site visitors. Please write comments in the block form below, ask questions, share photos and useful information.